Worked, unit-aware calculation worksheets across structural, mechanical, electrical and more. Open any example into your own workspace to edit and reuse. New to Calculeaf? Start with your first worksheet or the examples guide.
59 examples found
The maximum theoretical work obtainable from a heat stream at a given temperature relative to the surrounding environment.
The humidity ratio (mass of water vapor per mass of dry air) of moist air from its vapor pressure and total atmospheric pressure.
The dry-bulb temperature of air leaving a direct evaporative cooler, from the inlet dry- and wet-bulb temperatures and cooler effectiveness.
The instantaneous cooling load a building must offset from solar radiation transmitted through a window.
The mass ratio of air to fuel needed for complete, stoichiometric combustion of octane, derived from the balanced combustion reaction.
A simplified estimate of the temperature rise from adiabatic combustion, from the fuel's heating value, air-fuel ratio, and combustion product specific heat.
The heat transfer rate from a straight rectangular fin, from fin geometry, material conductivity, and the convective heat transfer coefficient.
A check that a pair of radiation view factors between two surfaces satisfies the reciprocity relation, and back-calculation of the unknown factor.
The insulation thickness needed to hold a wall's conductive heat loss at or below a target value, from rearranged Fourier's law.
An estimate of the dew point temperature of moist air from its dry-bulb temperature and relative humidity using the empirical Magnus formula.
The number of times per hour a room's air volume is fully replaced by ventilation airflow, a standard indoor air quality metric.